Join the fight against non-compliant products! Take the online training and add your voice to this campaign!.

@
 
 

NHP Electrical DC Solar Isolator Switches

/product-recall-3.png

There is a product recall for NHP Electrical Engineering Products P/L—DC Solar Isolator Switches. The switch contact mechanism may overheat due to an internal fault; this could result in damage of the switch mechanism, internal arcing and potential damage to the enclosure and cables which could allow access to live parts.
 

Product description
NHP- KDA-432 and KDM-432 metal and plastic isolators
 
Identifying features
KDA-432
KDM-432
 
What are the defects?
The switch contact mechanism may overheat due to an internal fault; this could result in damage of the switch mechanism, internal arcing and potential damage to the enclosure and cables which could allow access to live parts.
 
What are the hazards?
If the defect occurs there is the risk of fire and electric shock.
 
Dates available for sale
11th July 2013 - 10th October 2014
 
Where the product was sold
Nationally
 
Traders who sold this product
Via electrical wholesalers and direct customer sales
 
Supplier
NHP Electrical Engineering Products P/L
 
What should consumers do?
The DC solar isolator switches must be replaced via a licensed installer.
 
Consumers: 
Contact your electrical contractor or installer to arrange for remediation of the affected solar isolator switch.
 
Electrical contractors/Installers:
Shut down the PV system.
 
Defective switches are required to be replaced. For further details contact NHP Electrical Engineering Products Pty Ltd by phone or email.
 
Customer Service Centre:
Phone 1300 NHPNHP (1300 647 647) or email to nhpsales@nhp.com.au
Visit our web page www.nhp.com.au/recall for further details
 
Re-sellers: 
Cease supplying switches and arrange returns to NHP by contacting (03) 9368 4088 or email NHPReturns@nhp.com.au. Visit www.nhp.com.au/recall for further details.

  • Nov 23, 2014

Read others news